Best VapeCon starter kits for loyal customers in Norway (Voopoo Drag)

VapeCon starter kits advice for Norway, covering modifications, what to look for and where the trade-offs actually sit.

We spent weeks putting vapecon starter kits options through their paces so the recommendations here reflect real use. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.

Budget matters in Norway, but with vapecon starter kits the cheapest option is rarely the one that lasts. Charging over Micro-USB takes about 26 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries.

We would pair the RELX Pro with a 35:65 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 0.8 Ω mesh coil is the sensible default to keep in stock. The included spare coils are useful for the first fortnight, after which you will be ordering your own.

What surprised us most was how little the 0.8 Ω mesh coil changes the draw character compared with the 35:65 PG/VG liquid sitting in the chamber. The Graphite finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily. Worth noting that the 510 bottom pin takes a small amount of care to keep clean, which we cover in the maintenance section below.

Two things to check before ordering: the Micro-USB socket on the base and whether the 0.8 Ω mesh coil is the newer generation. For loyal customers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge. If you take one thing from this page, make it the coil compatibility check. A device that needs a coil you cannot source locally becomes an expensive ornament within a month.

Battery behaviour is where the RELX Pro earns its keep: the 1200 mAh cell holds a usable charge for most of a day at 200 and recharges over Micro-USB. Expect roughly 1300 full puffs from a charge at 0 mg/ml, based on average session length in our testing. Replacement coils are widely available, and the 0.8 Ω mesh coil is the sensible default to keep in stock.

Flavour tracking stays consistent from the first day to roughly the 0.8 Ω mesh mark before the profile flattens and a swap makes sense. In Norway, availability of the 0.8 Ω mesh coil is the practical bottleneck, not the device itself. The narrow bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.

Charging over Micro-USB takes about 26 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Comparing this against a 35:65 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. For loyal customers, the learning curve is shorter than the specification list suggests, and daily use is straightforward from the first charge.

Specifications

Every unit in the RELX Pro family shares the same core platform, so the differences come down to the numbers below.

Flavour and performance notes

A representative profile is Melon Cucumber: fresh, light, described as clean cucumber under sweet melon. On a 35:65 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 0.8 Ω mesh mark before the coil begins to mute it.

Practical considerations in Norway

Availability in Norway is the factor that decides most outcomes here. Confirm the 0.8 Ω mesh and the Micro-USB are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and NOK rates move, so treat prices as current rather than fixed.

Our advice is to order one, use it for a fortnight, and only then decide whether to stock up.