VapeCon starter kits upgrades and spare parts (Smok Morph) (v2)
VapeCon starter kits advice for Norway, covering setup, what to look for and where the trade-offs actually sit.
Local availability in Norway shapes the practical answer more than the marketing does. Comparing this against a 80:20 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume.
Search results for vapecon starter kits in Norway are crowded, which is why this page focuses on what actually changes the experience. Airflow control on the Innokin Sceptre is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank.
Battery behaviour is where the Innokin Sceptre earns its keep: the 2000 mAh cell holds a usable charge for most of a day at 80 and recharges over USB-C. We would pair the Innokin Sceptre with a 80:20 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably. Replacement coils are widely available, and the 1.0 Ω mesh coil is the sensible default to keep in stock.
The standard bore mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips. Comparing this against a 80:20 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 6.5 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Two things to check before ordering: the USB-C socket on the base and whether the 1.0 Ω mesh coil is the newer generation. Vapour production is more than adequate at 80, and pushing beyond that adds heat rather than anything worth carrying. We would pair the Innokin Sceptre with a 80:20 PG/VG liquid, which is where the balance between throat hit and cloud density sits most comfortably.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. What surprised us most was how little the 1.0 Ω mesh coil changes the draw character compared with the 80:20 PG/VG liquid sitting in the chamber. The Crimson Red finish hides fingerprints far better than the gloss options, which matters more than it sounds on a device handled daily.
Charging over USB-C takes about 25 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Airflow control on the Innokin Sceptre is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. Battery behaviour is where the Innokin Sceptre earns its keep: the 2000 mAh cell holds a usable charge for most of a day at 80 and recharges over USB-C.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Innokin Sceptre |
|---|---|
| Brand family | IQOS |
| Battery capacity | 2000 mAh |
| Power range | 80 W |
| Liquid capacity | 6.5 ml |
| Coil | 1.0 Ω mesh |
| Bottle size | 200 ml |
| Liquid ratio | 80:20 PG/VG |
| Nicotine strength | 3 mg/ml |
| Material | stainless steel |
| Charge port | USB-C |
| Connector | Q-Plus |
| Airflow | mesh window |
| Mouthpiece | standard bore |
Flavour and performance notes
A representative profile is Classic Menthol: cool, sharp, described as clean peppermint with consistent coolness. On a 80:20 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.0 Ω mesh mark before the coil begins to mute it.
Practical considerations in Norway
Availability in Norway is the factor that decides most outcomes here. Confirm the 1.0 Ω mesh and the USB-C are both in stock before committing, and check that the Q-Plus matches your existing device if you already own hardware. Duty and NOK rates move, so treat prices as current rather than fixed.
If any of the above addresses what you were trying to solve, the rest of the pages in this section cover it in more detail.
