VapeCon starter kits for cloud chasers: what works: Compared
VapeCon starter kits advice for Norway, covering servicing, what to look for and where the trade-offs actually sit.
Most Norway buyers start with a well-known brand name and then discover that fit and coil availability matter far more. In Norway, availability of the 1.2 Ω mesh coil is the practical bottleneck, not the device itself.
The gap between a mid-range and a premium vapecon starter kits narrows once you know which components you actually use. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Build quality is the quiet differentiator here, with tight seams and a connector that has not loosened after repeated removal. Charging over USB-C takes about 48 from empty, and the pass-through means the device can be used while plugged in on the smaller batteries. Two things to check before ordering: the USB-C socket on the base and whether the 1.2 Ω mesh coil is the newer generation.
Flavour tracking stays consistent from the first day to roughly the 1.2 Ω mesh mark before the profile flattens and a swap makes sense. In Norway, availability of the 1.2 Ω mesh coil is the practical bottleneck, not the device itself. The mesh tip mouthpiece is comfortable over long sessions and resists the condensation that gathers on narrower tips.
Vapour production is more than adequate at 25, and pushing beyond that adds heat rather than anything worth carrying. Materials are unremarkable on paper and feel reassuringly solid in the hand, with no flex in the body at all. The instruction booklet is thin, but the diagrams are clear enough that most people set the device up without further help.
Pricing in Norway shifts with import duty, so the figures here reflect current NOK rates rather than a fixed list price. Comparing this against a 50:50 PG/VG setup shows the difference clearly: one favours flavour, the other favours volume. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
The included spare coils are useful for the first fortnight, after which you will be ordering your own. Airflow control on the Innokin Sceptre is adjustable enough to move from a warm, restrained draw to something far more open without removing the tank. The 2.0 ml capacity is a genuinely useful middle ground: enough liquid for a long session without turning the device into a pocket problem.
Specifications
Specifications vary by batch, so treat these figures as the reference point rather than a guarantee for every unit.
| Reference model | Innokin Sceptre |
|---|---|
| Brand family | Beipu |
| Battery capacity | 5000 mAh |
| Power range | 25 W |
| Liquid capacity | 2.0 ml |
| Coil | 1.2 Ω mesh |
| Bottle size | 1.6 ml |
| Liquid ratio | 50:50 PG/VG |
| Nicotine strength | 0 mg/ml |
| Material | anodised aluminium |
| Charge port | USB-C |
| Connector | 510 bottom pin |
| Airflow | mesh window |
| Mouthpiece | mesh tip |
Flavour and performance notes
A representative profile is Blue Raspberry Frost: sweet, tangy, described as sharp blue raspberry with a long cold finish. On a 50:50 PG/VG ratio this reads clearly on the first day and holds its character to roughly the 1.2 Ω mesh mark before the coil begins to mute it.
Practical considerations in Norway
Availability in Norway is the factor that decides most outcomes here. Confirm the 1.2 Ω mesh and the USB-C are both in stock before committing, and check that the 510 bottom pin matches your existing device if you already own hardware. Duty and NOK rates move, so treat prices as current rather than fixed.
Questions about a specific configuration? Send the model name and we will confirm the parts that fit.
